VT-Style Carbon Fiber Rear Trunk Spoiler Wing for 2018-2021 Kia Stinger | High Performance Duckbill Tail Lid (52x4x14) | Enhances Aerodynamics & Sporty Look for Street Racing & Car Shows

Compatibility:? Compatible with 2018 2019 2020 2021 Kia Stinger ModelPackage includes:? 1 x 100% Real Carbon Fiber Rear Trunk Spoiler (Installation instruction is not included)Features:100% Brand New that has never been used or installed.Easy installation ( professional installation required )Improves the aerodynamics and the streamline of your vehicle.Made From High Quality 100% Real Carbon Fiber that is Very Flexible, Reliable and Sturdy.VT-Style Rear Trunk Spoiler WingIn addition to the aesthetics of the mounting tail, the greater effect is to use the airflow to generate the downward pressure to make the tire grip the ground and improve the driving stability.How to install:1. Make sure the trunk lid is clean, wash with soap and water, dry the area, then use isopropyl alcohol or "paint prep" (available in auto parts stores) to remove any grease, wax, etc.2. If the spoiler was shipped without the adhesive tape installed onto it, put it into place now. BUT leave the sticky part covered by its protective tape.3. Position the spoiler in place on the trunk. Use a tape measure to check that left and right sides are even. When you are 100% certain of its location, use masking tape on the trunk lid as a location guide.5. Relocate the spoiler onto the trunk lid, using the masking tape you put down earlier as a guide. Do not press down too firmly yet. With the spoiler in place, continue to pull on and remove the protective tape.6. Once all the protective tape is removed, apply even pressure all around the spoiler, making sure that the adhesive tape is pressed against the body panel.7. Most spoiler manufacturers recommend that the vehicle remain undisturbed (do not wash, wax, or drive) for 12 hours, to give the adhesive a chance to set.